Skip to main content
Version: Next

Peer-to-peer how-to guides

This guide provides step-by-step instructions for configuring and managing peer-to-peer networking in DefraDB.

Prerequisites​

Before following these guides, ensure you have:

  • DefraDB installed on your system
  • Basic familiarity with command-line interfaces
  • Understanding of P2P networking concepts

Start and configure DefraDB​

Start DefraDB with P2P enabled (default)​

P2P networking is enabled by default when you start DefraDB:

defradb start

You'll see output similar to:

Jan 2 10:15:49.124 INF cli Starting DefraDB
Jan 2 10:15:49.161 INF net Created LibP2P host PeerId=12D3KooWEFCQ1iGMobsmNTPXb758kJkFc7XieQyGKpsuMxeDktz4 Address=[/ip4/127.0.0.1/tcp/9171]
Jan 2 10:15:49.162 INF net Starting internal broadcaster for pubsub network

Start DefraDB without P2P​

To disable P2P networking:

defradb start --no-p2p

Change the P2P port​

By default, DefraDB listens on port 9171. To use a different port:

defradb start --p2paddr /ip4/<ip_address>/tcp/<port>

Example:

defradb start --p2paddr /ip4/0.0.0.0/tcp/9172

Parameters:

  • Replace <ip_address> with your actual IP address (use 0.0.0.0 to listen on all interfaces)
  • Replace <port> with your desired port number

Manage Peer IDs​

Get your Peer ID​

To retrieve your node's Peer ID using HTTP:

defradb client p2p info

The Peer ID is generated from a private key created during the first startup and remains consistent across restarts.

Connect to peers​

Connect to a specific peer​

To connect to a particular peer when starting DefraDB:

defradb start --peers /ip4/<ip_address>/tcp/<port>/p2p/<peer_id>

Example:

defradb start --peers /ip4/192.168.1.100/tcp/9171/p2p/12D3KooWEFCQ1iGMobsmNTPXb758kJkFc7XieQyGKpsuMxeDktz4

Parameters:

  • Replace <ip_address> with the peer's IP address
  • Replace <port> with the peer's P2P port
  • Replace <peer_id> with the peer's Peer ID

Manage document subscriptions (passive replication)​

Passive replication works at the document level. Subscribe to specific documents to receive updates automatically.

Subscribe to document updates​

defradb client p2p document add <docID>

Example:

defradb client p2p document add bae-619ea0d2-35ba-5e8c-ac4d-2b769937213b

Unsubscribe from document updates​

defradb client p2p document remove <docID>

View all active document subscriptions​

defradb client p2p document getall

Manage collection subscriptions (active replication)​

Active replication can work at the collection level, allowing you to replicate entire collections to specific peers.

Subscribe to collection updates​

defradb client p2p collection add <collectionID>

Unsubscribe from collection updates​

defradb client p2p collection remove <collectionID>

View all active collection subscriptions​

defradb client p2p collection getall

Add a replicator using CLI​

defradb client p2p replicator set -c <collection_name> <peer_id>

Example:

defradb client p2p replicator set -c Books 12D3KooWEFCQ1iGMobsmNTPXb758kJkFc7XieQyGKpsuMxeDktz4

Note: Currently, replicators don't persist through node restarts. You'll need to re-add them after each restart. This limitation will be addressed in a future release.

Troubleshooting​

Verify P2P is running​

Check the startup logs for confirmation that the LibP2P host was created and the P2P network is active:

INF net Created LibP2P host PeerId=... Address=[...]
INF net Starting internal broadcaster for pubsub network

Connection issues within home networks​

If peers can't connect within the same home Wi-Fi network, this is typically due to NAT firewall restrictions. Consider:

  1. Using circuit relays (a publicly accessible third-party node as an intermediary)
  2. Configuring NAT hole punching
  3. Connecting peers through the internet rather than the local network

See the P2P Concepts page for more information on NAT traversal.

Peer-to-peer how-to guides
Edit this page